Product Description:
Electric Fan Motor Axial Ceramic Case Resistor Type Temperature
Fuse Thermal Cutoff Fuse
Structure
The thermal fuse is composed of ceramic shell, low melting point
alloy wire, special resin, pin copper wire and sealing resin.
Apprearance
The marking must be clear; the sealing resin should fill the mouth
and it is acceptable; the lead tin-plated layer is good; there is
no oxidized black spot damage; the shell has no damage marks,
perforations, etc.
| No. | Rated operating temperature
Tf(℃) | Hold temperature
Tc(℃) | Limit temperature Tm
(℃) | Measured operating temperature
(℃) | Rated voltage (V) | Rated current
In(A) |
| Y20 | 115 | 87 | 150 | 112±3 | 250 | 2 |
Dimensions
| a | b | c | d |
| 9.5±0.5 | 80±5 | 0.5±0.2 | 2.5±0.1 |
| Name | Thermal Fuse | | | Applicable Standards | |
| Test items | Unit | Safety standard | Testing equipment |
| Action temperature detection | ℃ | +0
TF
-10 | thermotank |
| High pressure test | V | 1000+2 times the rated voltage | Withstand voltage tester |
| Insulation resistance detection | MΩ | ＞2 | Digital Megger |
| Internal resistance detection | Ω | ＜0.028 | Bridge resistance tester |
| High pressure test after temperature check | V | ＞500 | Withstand voltage tester |
| Insulation resistance test after temperature test | MΩ | ＞0.2 | Digital Megger |
| Distortion detection | Each lead is bent 90° at a distance of 10mm from the thermal fuse,
and then twisted in the opposite direction by 180° without damaging
the components. | Manual operation |
Experimental Method
The experimental conditions are temperature 25±10℃, humidity
65±15%M
1 Action humidity accuracy: Rely on the IE691: 1995 inspection
method and measure with the built-in silicone oil pool in the
thermostat.
2 Size: Measure the finished product with a micrometer/vernier
ruler.
3 Appearance: visual inspection.
4 Insulation resistance: Measure the finished product with SP-3A
digital megohmmeter, and measure the voltage DC500V.
5 Withstand voltage: Use the ZNY-12 withstand voltage test to
determine the finished product, which takes 1 minute.
6 Tensile force: Measure the finished product with a push-pull
tester, and the pin bears 1.5 pounds of pulling force for 10
minutes without damaging the components.
7 Torsion: Bend the lead at 10mm at 90°C, and then reverse it at
180°C without damaging the component.
Test Requirements
1. Rated operating temperature (Tf): The temperature at which the
thermal fuse is tested according to the standard method to change
its conductive state. (The Japanese Electrical Appliances
Management Law stipulates that the tolerance range is ±7℃ for
operation).
2. Measured operating temperature: The temperature fuse is heated
in the silicone oil bath at a rate of 0.5-1°C per minute, and the
fusing temperature obtained when the detection current is less than
100MA. It is the actual temperature of the thermal fuse.
3. Holding temperature (Tc): The maximum temperature at which the
thermal fuse can maintain 168 hours without changing its conductive
state when passing the rated current.
4. Limit temperature (Tm): The maximum temperature at which the
thermal fuse can withstand 10 minutes without reconnection.
5. Rated voltage (Ur): The highest working voltage of the thermal
fuse.
Thermal Cutoff Fuse: A Reliable and High Performance Solution
The Thermal Cutoff Fuse is a temperature sensitive circuit breaker
that is designed to protect electrical appliances from overheating
and potential fire hazards. It is a crucial safety device that is
widely used in various electronic products, such as computers,
televisions, air conditioners, and other household appliances.
Product Overview
The Thermal Cutoff Fuse is a small, yet powerful, device that is
designed to interrupt the flow of electricity when the rated
temperature is exceeded. It is made up of a thermal fuse interlock
that consists of a temperature-sensitive metal or alloy strip,
which is connected to two electrical leads.
Key Features
- Rated Current: The Thermal Cutoff Fuse is available in two different rated
currents - 10A and 16A, to cater to various electrical appliances'
needs. It can handle high current loads without any risk of failure
or damage.
- Breaking Capacity: With its high breaking capacity, the Thermal Cutoff Fuse can
safely interrupt the flow of electricity and prevent damage to the
appliance or surrounding area.
- Shape: The Thermal Cutoff Fuse comes in a resistor shape, making it easy
to install and fit into different types of electronic products.
- Rated Voltage: It is designed to work with a rated voltage of 250V, making it
suitable for a wide range of electrical equipment.
- Rated Temperature: The Thermal Cutoff Fuse has a rated temperature range of 76℃ to
260℃, ensuring reliable protection against overheating in various
applications.
Benefits
- Longer Lifespan: The Thermal Cutoff Fuse has a longer lifespan compared to other
safety devices, making it a cost-effective solution for protecting
electrical appliances.
- High Performance: It is designed to provide high performance and reliable
protection, even in extreme temperatures.
- Safe and Reliable: The Thermal Cutoff Fuse is a safe and reliable solution for
preventing potential fire hazards caused by overheating in
electronic products.
Conclusion
The Thermal Cutoff Fuse is a crucial safety device that offers
reliable protection against overheating in electronic products.
With its high breaking capacity, multiple rated currents and
temperatures, and resistor shape, it can cater to various
electrical appliances' needs. Its longer lifespan, high
performance, and safety features make it an ideal choice for
ensuring the safety and longevity of your electronic devices.
Features:
- Product Name: Thermal Cutoff Fuse
- Rated Voltage: 250V
- Shape: Resistor
- Breaking Capacity: High
- Rated Current: 10A, 16A
- Usage: Thermal
- Thermal Fuse
- Thermal Cutoff
- Thermal Safety Cutoff
- Temperature Sensitive Circuit Breaker
Technical Parameters:
| Thermal Cutoff Fuse | |
|---|
| Case | Metal |
| Rated Temperature | 76℃To 260℃ |
| Breaking Capacity | High |
| Rated Voltage | 250V |
| Size | 62x4mm |
| Rated Current | 10A 16A |
| Usage | Thermal |
| Shape | Resistor |
| Thermal Trip Device | Thermal Cutoff Switch |
| Thermal Fuse Interlock | |
Applications:
Thermal Safety Cutoff - LinKun
Brand Name: LinKun
Model Number: RY RYB Series
Place of Origin: China DongGuang
Rated Temperature: 76℃ to 260℃
Key Features:
- Thermal Safety Cutoff
- Cutoff Thermal Link
- Thermal Cutoff Switch
- Thermal Fuse
- Shape: Resistor
- Case: Metal
- Usage: Thermal
- Rated Voltage: 250V
Product Description:
The Thermal Safety Cutoff Fuse, also known as Cutoff Thermal Link
or Thermal Cutoff Switch, is a vital component in electrical
devices that helps prevent overheating and potential fire hazards.
LinKun's RY RYB Series Thermal Cutoff Fuse is designed to interrupt
the flow of electricity when the rated temperature is exceeded,
protecting the device and its surroundings from damage.
The RY RYB Series Thermal Cutoff Fuse is manufactured in China
DongGuang and can operate within a temperature range of 76℃ to
260℃. This makes it suitable for a wide range of applications, from
household appliances and electronics to industrial equipment.
Product Usage:
The Thermal Safety Cutoff Fuse is typically installed in devices
such as hair dryers, coffee makers, and electric heaters. It can
also be used in larger appliances like refrigerators, washing
machines, and air conditioners. In industrial settings, the Thermal
Cutoff Fuse is commonly used in motors, transformers, and power
supplies.
The RY RYB Series Thermal Cutoff Fuse is designed to be easy to
install and use. Its compact shape, resembling a resistor, allows
it to be easily integrated into various devices. The metal case
provides durability and protection from external factors. And with
a rated voltage of 250V, it can handle a wide range of electrical
systems.
Product Benefits:
- Prevents overheating and potential fire hazards
- Wide temperature range for various applications
- Compact shape for easy integration
- Durable metal case for protection
- Compatible with multiple electrical systems
Choose LinKun for Your Thermal Safety Needs:
With over 20 years of experience in the industry, LinKun is a
trusted manufacturer of high-quality Thermal Cutoff Fuses. Our RY
RYB Series Fuse is made with precision and undergoes rigorous
testing to ensure its reliability and safety. We are dedicated to
providing our customers with the best products and services, and
our Thermal Safety Cutoff Fuse is no exception. Choose LinKun for
your thermal safety needs and have peace of mind knowing that your
devices are protected.
Customization:
Thermal Cutoff Fuse Customization Service
Brand Name: LinKun
Model Number: RY RYB Series
Place of Origin: China DongGuang
Rated Temperature: 76℃ to 260℃
Rated Voltage: 250V
Rated Current: 10A, 16A
Size: 62x4mm
Shape: Resistor
Our Thermal Cutoff Fuse is a reliable and high-quality product
designed to protect electronic devices from excessive heat and
prevent potential hazards. As a leading manufacturer and supplier
in China, LinKun offers a customizable service for our Thermal
Cutoff Fuse, providing tailored solutions to meet your specific
needs and requirements.
Our Thermal Cutoff Fuse, also known as Thermal Shutoff Fusible
Link, Thermal Safety Cutoff, or Thermal Trip Device, is designed to
automatically cut off the electrical current when the rated
temperature is exceeded, ensuring the safety and protection of your
electronic devices. With a rated temperature range of 76℃ to 260℃,
our Thermal Cutoff Fuse can effectively prevent overheating and
potential fires.
In addition, our Thermal Cutoff Fuse has a rated voltage of 250V
and a rated current of 10A and 16A, making it suitable for a wide
range of electronic applications. Its compact size of 62x4mm and
resistor shape allows for easy installation and integration into
your electronic circuit.
At LinKun, we understand that every customer has unique
requirements and specifications. That's why we offer a
customization service for our Thermal Cutoff Fuse, allowing you to
choose the desired temperature range, voltage, current, size, and
shape for your specific application. Our experienced team will work
closely with you to ensure that the final product meets your
expectations and delivers the best performance.
Choose LinKun as your partner for Thermal Cutoff Fuse customization
service and let us help you protect your electronic devices from
potential hazards. Contact us now to discuss your customization
needs and get a quote.
Packing and Shipping:
Packaging and Shipping
The Thermal Cutoff Fuse is carefully packaged to ensure safe and
undamaged delivery to our customers. Each fuse is individually
wrapped in protective packaging and then placed in a sturdy carton
box. The carton box is then sealed and labeled with the product
name, model number, and quantity for easy identification.
For shipping, we offer various options to meet our customers'
needs. We work closely with trusted courier services to provide
timely and efficient delivery worldwide. Our team also ensures that
all necessary customs documents are prepared and included with the
shipment to facilitate smooth customs clearance.
We understand the importance of delivering our products on time and
in good condition. Therefore, we take all necessary measures to
ensure that the Thermal Cutoff Fuse arrives at its destination
safely and on schedule.
