Product Description:
Electric Fan Motor Axial Ceramic Case Resistor Type Temperature
Fuse Thermal Cutoff Fuse
Structure
The thermal fuse is composed of ceramic shell, low melting point
alloy wire, special resin, pin copper wire and sealing resin.
Apprearance
The marking must be clear; the sealing resin should fill the mouth
and it is acceptable; the lead tin-plated layer is good; there is
no oxidized black spot damage; the shell has no damage marks,
perforations, etc.
| No. | Rated operating temperature
Tf(℃) | Hold temperature
Tc(℃) | Limit temperature Tm
(℃) | Measured operating temperature
(℃) | Rated voltage (V) | Rated current
In(A) |
| Y20 | 115 | 87 | 150 | 112±3 | 250 | 2 |
Dimensions
| a | b | c | d |
| 9.5±0.5 | 80±5 | 0.5±0.2 | 2.5±0.1 |
| Name | Thermal Fuse | | | Applicable Standards | |
| Test items | Unit | Safety standard | Testing equipment |
| Action temperature detection | ℃ | +0
TF
-10 | thermotank |
| High pressure test | V | 1000+2 times the rated voltage | Withstand voltage tester |
| Insulation resistance detection | MΩ | ＞2 | Digital Megger |
| Internal resistance detection | Ω | ＜0.028 | Bridge resistance tester |
| High pressure test after temperature check | V | ＞500 | Withstand voltage tester |
| Insulation resistance test after temperature test | MΩ | ＞0.2 | Digital Megger |
| Distortion detection | Each lead is bent 90° at a distance of 10mm from the thermal fuse,
and then twisted in the opposite direction by 180° without damaging
the components. | Manual operation |
Experimental Method
The experimental conditions are temperature 25±10℃, humidity
65±15%M
1 Action humidity accuracy: Rely on the IE691: 1995 inspection
method and measure with the built-in silicone oil pool in the
thermostat.
2 Size: Measure the finished product with a micrometer/vernier
ruler.
3 Appearance: visual inspection.
4 Insulation resistance: Measure the finished product with SP-3A
digital megohmmeter, and measure the voltage DC500V.
5 Withstand voltage: Use the ZNY-12 withstand voltage test to
determine the finished product, which takes 1 minute.
6 Tensile force: Measure the finished product with a push-pull
tester, and the pin bears 1.5 pounds of pulling force for 10
minutes without damaging the components.
7 Torsion: Bend the lead at 10mm at 90°C, and then reverse it at
180°C without damaging the component.
Test Requirements
1. Rated operating temperature (Tf): The temperature at which the
thermal fuse is tested according to the standard method to change
its conductive state. (The Japanese Electrical Appliances
Management Law stipulates that the tolerance range is ±7℃ for
operation).
2. Measured operating temperature: The temperature fuse is heated
in the silicone oil bath at a rate of 0.5-1°C per minute, and the
fusing temperature obtained when the detection current is less than
100MA. It is the actual temperature of the thermal fuse.
3. Holding temperature (Tc): The maximum temperature at which the
thermal fuse can maintain 168 hours without changing its conductive
state when passing the rated current.
4. Limit temperature (Tm): The maximum temperature at which the
thermal fuse can withstand 10 minutes without reconnection.
5. Rated voltage (Ur): The highest working voltage of the thermal
fuse.
Thermal Cutoff Fuse - The Ultimate Protection for Your Electrical
Devices
The Thermal Cutoff Fuse is a type of fusible link that has been
specifically designed to protect your electrical devices from
overheating and potential fire hazards. With a high breaking
capacity, durable metal casing, and a wide range of rated currents
and temperatures, this fuse is the perfect solution for ensuring
the safety and longevity of your electronic equipment.
Breaking Capacity
The Thermal Cutoff Fuse boasts a high breaking capacity, meaning it
can handle large amounts of electrical current without breaking or
melting. This makes it suitable for use in a variety of devices,
from small household appliances to large industrial machinery.
Size
The Thermal Cutoff Fuse comes in a compact size of 62x4mm, making
it easy to install in tight spaces and ensuring minimal disruption
to your device's design. Despite its small size, this fuse packs a
powerful punch and can effectively protect your equipment from
thermal overloads.
Rated Current
This Thermal Fuse is available in two different rated currents -
10A and 16A. This means you can choose the appropriate fuse for
your specific device, ensuring optimal performance and protection.
Case
The case of the Thermal Cutoff Fuse is made of metal, providing
superior durability and protection against external factors such as
heat and moisture. This ensures the fuse can withstand extreme
conditions and continue to function effectively.
Rated Temperature
The Thermal Cutoff Fuse has a wide operating temperature range,
from 76℃ to 260℃. This means it can effectively detect and cut off
power when the temperature exceeds the rated temperature,
preventing potential damage to your device.
Thermal Shutoff Fusible Link
The Thermal Cutoff Fuse is also referred to as a Thermal Shutoff
Fusible Link, as it works by breaking the electrical circuit when
the temperature reaches a dangerous level. This ensures the device
is immediately cut off from power, preventing any potential
hazards.
Thermal Fuse Thermal Cutoff
This Thermal Cutoff Fuse is also commonly known as a Thermal Fuse
Thermal Cutoff, as it operates based on the principle of thermal
cutoff. It is designed to provide a fail-safe mechanism to protect
your device from overheating and potential fire hazards.
The Ultimate Protection for Your Electrical Devices
In conclusion, the Thermal Cutoff Fuse is an essential component
for ensuring the safety and longevity of your electronic equipment.
With its high breaking capacity, compact size, durable metal
casing, and wide range of rated currents and temperatures, this
fuse is the ultimate protection for your devices against thermal
overloads. Choose the Thermal Cutoff Fuse for peace of mind and
reliable performance.
Features:
- Product Name: Thermal Cutoff Fuse
- Rated Voltage: 250V
- Rated Current: 10A, 16A
- Shape: Resistor
- Rated Temperature: 76℃ to 260℃
- Usage: Thermal
- Temperature Sensitive Circuit Breaker
- Thermal Cutoff Switch
- Thermal Safety Cutoff
Technical Parameters:
| Product Name | Thermal Cutoff Fuse |
|---|
| Type | Thermal Fuse Protector, Thermal Cutoff Switch, Cutoff Thermal Link |
|---|
| Rated Voltage | 250V |
|---|
| Case | Metal |
|---|
| Shape | Resistor |
|---|
| Usage | Thermal |
|---|
| Rated Current | 10A, 16A |
|---|
| Breaking Capacity | High |
|---|
| Size | 62x4mm |
|---|
| Rated Temperature | 76℃ to 260℃ |
|---|
Applications:
Thermal Cutoff Fuse - Protecting Your Devices from Overheating
Brand Name: LinKun
Model Number: RY RYB Series
Place of Origin: China DongGuang
Shape: Resistor
Breaking Capacity: High
Case: Metal
Rated Temperature: 76℃ to 260℃
Usage: Thermal
Thermal Cutoff Fuse, also known as Thermal Fuse Protector or
Thermal Cutoff Switch, is a type of safety device that is used to
protect electronic devices from overheating. It is designed to cut
off the power supply to the device when the temperature reaches a
certain level, preventing damage and potential hazards.
Application Scenarios
Thermal Cutoff Fuse is widely used in various electronic devices
and appliances, including but not limited to:
- Computers and laptops
- Microwaves and ovens
- TVs and home theater systems
- Power tools
- Refrigerators and freezers
- Automotive electronics
- Industrial equipment
How It Works
The Thermal Cutoff Fuse is made up of a metal casing with a small
piece of fuse inside. When the temperature rises to a critical
level, the fuse will melt and break the electrical connection,
cutting off the power supply to the device. As the temperature
cools down, the fuse will solidify again, allowing the device to
function normally.
The breaking capacity of the Thermal Cutoff Fuse is high, ensuring
that even in extreme conditions, it will be able to cut off the
power supply effectively. The metal case provides extra protection
and durability, making it suitable for use in various environments.
Why Choose LinKun Thermal Cutoff Fuse
LinKun is a trusted brand in the field of thermal protection
devices. Our RY RYB Series Thermal Cutoff Fuse is manufactured in
China DongGuang, using high-quality materials and advanced
technology to ensure its reliability and effectiveness.
Our Thermal Cutoff Fuse has a rated temperature range of 76℃ to
260℃, making it suitable for a wide range of applications. It is
also compact in size and easy to install, making it a convenient
choice for both manufacturers and end-users.
With LinKun Thermal Cutoff Fuse, you can have peace of mind knowing
that your devices are protected from overheating and potential
hazards.
Customization:
Customized Service for Thermal Cutoff Fuse
Brand Name: LinKun
Model Number: RY RYB Series
Place of Origin: China DongGuang
Case: Metal
Usage: Thermal
Size: 62x4mm
Shape: Resistor
Rated Voltage: 250V
Our Thermal Cutoff Fuse, also known as Temperature Sensitive
Circuit Breaker, Thermal Overload Switch, or Thermal Fuse, is a
reliable and customizable solution for protecting electrical
equipment from overheating.
At LinKun, we offer a wide range of options for our customers to
customize their Thermal Cutoff Fuses to meet their specific needs.
With our expertise in thermal technology and our commitment to
quality, we are able to provide the following services:
- Customized size and shape to fit your equipment perfectly
- Personalized branding with your company logo
- Choice of metal case for durability and heat resistance
- Adjustable temperature rating to suit your application
- Flexible voltage options up to 250V
As a trusted manufacturer based in China DongGuang, we pride
ourselves on delivering high-quality Thermal Cutoff Fuses that meet
international standards. Our team of experts will work closely with
you to understand your requirements and provide the best solution
for your thermal protection needs.
Don't compromise on safety and reliability for your electrical
equipment. Choose LinKun's Thermal Cutoff Fuse for customized and
superior thermal protection. Contact us today to learn more about
our services and how we can help you.
Packing and Shipping:
Thermal Cutoff Fuse Packaging and Shipping
The Thermal Cutoff Fuse is packaged in a sturdy cardboard box to
ensure safe transportation and storage. The box is labeled with the
product name, model number, and specifications for easy
identification.
Inside the box, the Thermal Cutoff Fuse is wrapped in protective
plastic and placed in a foam insert to prevent any damage during
shipping. The foam insert is designed to fit the shape and size of
the fuse, providing additional protection.
The box also includes a user manual and any necessary installation
accessories. The user manual contains important information on how
to properly install and use the Thermal Cutoff Fuse.
For international shipping, the box is labeled with the necessary
customs information and documentation. Our team takes great care in
packaging the product to ensure it arrives safely and in good
condition.
Once packaged, the Thermal Cutoff Fuse is shipped via a reliable
and trusted shipping carrier. The shipping options and costs may
vary depending on the destination and urgency of the order.
Upon delivery, please inspect the package for any signs of damage.
If any damage is found, please contact us immediately for
assistance.
Thank you for choosing our Thermal Cutoff Fuse. We take pride in
providing high-quality products and ensuring they arrive safely to
our customers.
