MF72 Power Series 5ohm 5A 13mm 5D-13 Surge Current Suppression NTC
Thermistor for Power Supply EquipmentMF72 Power NTC Thermistor
Series
LK-MF72
Power Thermistor1.pdf
Small size, high power, strong ability to suppress surge current
Fast response
Material constant (B value) is large, and the residual resistance
is small
Long life and high reliability
Complete series, wide application range
●Introduction
When you turn on an electrical equipment, the surge current can be
restrained by a power NTC termistor connected in series with the
power circuit. Because of the continuing action of
current,temperature of power NTC thermistor raising, the resistance
will rapidly drop to a small value, the consumed power can be
ignored. So it can't affect normal operating current. Therefore,
using power NTC thermistor is a most effectively and most brief
measure to restrain surge current, protecting electrical equipment
from destruction.
●Applications
◎Conversion power-supply, switch power-supply, ups power-supply
◎Electronic energy saving lamps, electronic ballast and all kinds
of electric heater
◎All kinds of RT, display
◎ Bulb and other lighting lamps
●Characteristics
◎Small size, strong power and strong capability of surge current
protection.
◎ Fast response to surge current
◎ Big material constant (B value), Small remain resistance
◎Longevity of service. High reliability
◎ Integral series, extensive operating range
● MAIN TECHNICAL PARAMETER
Part No MF 72
| Max Steady State Current(A) | Approx.R of Max.Cur.(Ω ) | Operating Temp.(℃ ) | Max surge capacity(UF) 240V/AC |
| D5 | 0.1~1 | 0.353~18.70 | -140 ±150 | 47~100 |
| D7 | 0.2~2 | 0.283~11.65 | -140 ±150 | 68~150 |
| D9 | 0.2~4 | 0.120~30.30 | -140 ±170 | 47~220 |
| D11 | 1.2~5 | 0.095~1.656 | -140 ±170 | 150~470 |
| D13 | 1.2~7 | 0.062~2.124 | -140 ±200 | 220~560 |
| D15 | 1.8~8 | 0.075~1.652 | -140 ±200 | 330~680 |
| D20 | 5~11 | 0.018~0.212 | -140 ±200 | 680~1000 |
| D25 | 6~12 | 0.014~0.160 | -140 ±200 | 820~1200 |
●Dimensions(mm)
Part No Dim(mm) Sym | D max | T max | d ±0.05 | F1±1 | Straight lead | Kinked lead |
| | | | | Lmin | L1min | L2±2 |
| MF72 □D5 | 7 | 5 | 0.6/0.45 | 5 | 25 | 17/5 | 5 |
| MF72 □D7 | 9 | 5 | 0.6 | 5 | 25 | 17/5 | 5 |
| MF72 □D9 | 11 | 5.5 | 0.8/0.6 | 7.5 | 25 | 17/5 | 5 |
| MF72 □D1I | 13 | 5.5 | 0.8 | 7.5 | 25 | 17/5 | 5 |
| MF72 □D13 | 15.5 | 6 | 0.8 | 7.5 | 25 | 17/5 | 5 |
| MF72 □D15 | 17.5 | 6 | 0.8 | 7.5 | 25 | 17/5 | 5 |
| MF72 □D20 | 22.5 | 7 | 1.0 | 10 | 25 | / | / |
| MF72 □D25 | 27.5 | 8 | 1.0 | 10 | 25 | / | / |
MF72 power type NTC thermistor series
Main technical parameters:
| D-5 NTC Thermistor |
Part Number MF72 NTC | R25 (Ω) | Max steady-state current(A) | Approximate resistance value at maximum current Ω) | Dissipation coefficient approx. (MW /℃) | Thermal time constant approx. (S) | Operating temperature (°C) | UL |
| 3D-5 | 3 | 1.3 | 0.177 | 7 | 16 | -40〜+ 150 | |
| 5D-5 | 5 | 1 | 0.353 | 7 | 16 | -40〜+ 150 | √ |
| 10D-5 | 10 | 0.7 | 0.771 | 7 | 16 | -40〜+ 150 | √ |
| 20D-5 | 20 | 0.5 | 1.154 | 6 | 17 | -40〜+ 150 | |
| 60D-5 | 60 | 0.3 | 1.878 | 6 | 17 | -40〜+ 150 | |
| 200D-5 | 200 | 0.1 | 18.7 | 5 | 17 | -40〜+ 150 | √ |
D-7 NTC Thermistor |
Part Number MF72 NTC | R25 (Ω) | Max steady-state current(A) | Approximate resistance value at maximum current Ω) | Dissipation coefficient approx. (MW /℃) | Thermal time constant approx. (S) | Operating temperature (°C) | UL |
| 2.5D-7 | 2.5 | 3 | 0.132 | 11 | 27 | -40〜+ 150 | |
| 3D-7 | 3 | 2.5 | 0.145 | 11 | 27 | -40〜+ 150 | |
| 5D-7 | 5 | 2 | 0.283 | 9 | 23 | -40〜+ 150 | √ |
| 8D-7 | 8 | 1 | 0.539 | 9 | 28 | -40〜+ 150 | √ |
| 10D-7 | 10 | 1 | 0.616 | 9 | 23 | -40〜+ 150 | √ |
| 12D-7 | 12 | 1 | 0.816 | 9 | 23 | -40〜+ 150 | |
| 16D-7 | 16 | 0.7 | 1.003 | 8 | 23 | -40〜+ 150 | √ |
| 22D-7 | 22 | 0.6 | 1.108 | 8 | 23 | -40〜+ 150 | √ |
| 33D-7 | 33 | 0.5 | 1.485 | 8 | 23 | -40〜+ 150 | √ |
| 200D-7 | 200 | 0.2 | 11.65 | 7 | 21 | -40〜+ 150 | √ |
D-9 NTC Thermistor |
Part Number MF72 NTC | R25 (Ω) | Max steady-state current(A) | Approximate resistance value at maximum current Ω) | Dissipation coefficient approx. (MW /℃) | Thermal time constant approx. (S) | Operating temperature (°C) | UL |
| 1.5D-9 | 1.5 | 5 | 0.3 | 11 | 36 | -40〜+ 170 | |
| 2.5D-9 | 2.5 | 4.5 | 0.06 | 11 | 36 | -40〜+ 170 | |
| 3D-9 | 3 | 4 | 0.12 | 11 | 35 | -40〜+ 170 | √ |
| 4D-9 | 4 | 3 | 0.19 | 11 | 35 | -40〜+ 170 | √ |
| 5D-9 | 5 | 3 | 0.21 | 11 | 34 | -40〜+ 170 | √ |
| 6D-9 | 6 | 2 | 0.315 | 11 | 34 | -40〜+ 170 | √ |
| 8D-9 | 8 | 2 | 0.4 | 11 | 32 | -40〜+ 170 | √ |
| 10D-9 | 10 | 2 | 0.458 | 11 | 32 | -40〜+ 170 | √ |
| 12D-9 | 12 | 1 | 0.652 | 11 | 32 | -40〜+ 170 | √ |
| 16D-9 | 16 | 1 | 0.802 | 11 | 31 | -40〜+ 170 | √ |
| 20D-9 | 20 | 1 | 0.864 | 11 | 30 | -40〜+ 170 | √ |
| 22D-9 | 22 | 1 | 0.95 | 11 | 30 | -40〜+ 170 | √ |
| 30D-9 | 30 | 1 | 1.022 | 11 | 30 | -40〜+ 170 | √ |
| 33D-9 | 33 | 1 | 1.124 | 11 | 30 | -40〜+ 170 | √ |
| 50D-9 | 50 | 1 | 1.252 | 11 | 30 | -40〜+ 170 | √ |
| 100D-9 | 100 | 0.7 | 1.356 | 11 | 28 | -40〜+ 170 | |
| 200D-9 | 200 | 0.5 | 1.485 | 10 | 28 | -40〜+ 170 | |
| 400D-9 | 400 | 0.2 | 1.652 | 9 | 25 | -40〜+ 170 | |
| D-11 NTC Thermistor |
Part Number MF72 NTC | R25 (Ω) | Max steady-state current(A) | Approximate resistance value at maximum current Ω) | Dissipation coefficient approx. (MW /℃) | Thermal time constant approx. (S) | Operating temperature (°C) | UL |
| 1D-11 | 1 | 5.5 | 0.07 | 13 | 46 | -40〜+ 170 | |
| 1.5D-11 | 1.5 | 5.5 | 0.085 | 13 | 46 | -40〜+ 170 | |
| 2.5D-11 | 2.5 | 5 | 0.095 | 13 | 43 | -40〜+ 170 | √ |
| 3D-11 | 3 | 5 | 0.1 | 13 | 43 | -40〜+ 170 | √ |
| 4D-11 | 4 | 4 | 0.15 | 13 | 44 | -40〜+ 170 | √ |
| 5D-11 | 5 | 4 | 0.156 | 13 | 45 | -40〜+ 170 | √ |
| 6D-11 | 6 | 3 | 0.24 | 13 | 45 | -40〜+ 170 | √ |
| 8D-11 | 8 | 3 | 0.255 | 14 | 47 | -40〜+ 170 | √ |
| 10D-11 | 10 | 3 | 0.275 | 14 | 47 | -40〜+ 170 | √ |
| 12D-11 | 12 | 2 | 0.462 | 14 | 48 | -40〜+ 170 | √ |
| 16D-11 | 16 | 2 | 0.47 | 14 | 50 | -40〜+ 170 | √ |
| 20D-11 | 20 | 2 | 0.512 | 15 | 52 | -40〜+ 170 | √ |
| 22D-11 | 22 | 2 | 0.563 | 15 | 52 | -40〜+ 170 | √ |
| 30D-11 | 30 | 1.5 | 0.667 | 15 | 52 | -40〜+ 170 | √ |
| 33D-11 | 33 | 1.5 | 0.734 | 15 | 52 | -40〜+ 170 | √ |
| 50D-11 | 50 | 1.5 | 1.021 | 15 | 52 | -40〜+ 170 | √ |
| 60D-11 | 60 | 1.5 | 1.215 | 15 | 52 | -40〜+ 170 | √ |
| 80D-11 | 80 | 1.2 | 1.656 | 15 | 52 | -40〜+ 170 | √ |
| D-13 NTC Thermistor |
Part Number MF72 NTC | R25 (Ω) | Max steady-state current(A) | Approximate resistance value at maximum current Ω) | Dissipation coefficient approx. (MW /℃) | Thermal time constant approx. (S) | Operating temperature (°C) | UL |
| 1.3D-13 | 1.3 | 7 | 0.062 | 13 | 60 | -40〜+ 200 | √ |
| 1.5D-13 | 1.5 | 7 | 0.073 | 13 | 60 | 40〜+ 200 | √ |
| 2.5D-13 | 2.5 | 6 | 0.088 | 13 | 60 | 40〜+ 200 | √ |
| 3D-13 | 3 | 6 | 0.092 | 14 | 60 | 40〜+ 200 | √ |
| 4D-13 | 4 | 5 | 0.12 | 15 | 67 | 40〜+ 200 | √ |
| 5D-13 | 5 | 5 | 0.125 | 15 | 68 | 40〜+ 200 | √ |
| 6D-13 | 6 | 4 | 0.17 | 15 | 65 | 40〜+ 200 | √ |
| 7D-13 | 7 | 4 | 0.188 | 15 | 65 | 40〜+ 200 | √ |
| 8D-13 | 8 | 4 | 0.194 | 15 | 60 | 40〜+ 200 | √ |
| 10D-13 | 10 | 4 | 0.206 | 15 | 65 | 40〜+ 200 | √ |
| 12D-13 | 12 | 3 | 0.316 | 16 | 65 | 40〜+ 200 | √ |
| 15D-13 | 15 | 3 | 0.335 | 16 | 60 | 40〜+ 200 | √ |
| 16D-13 | 16 | 3 | 0.338 | 16 | 60 | 40〜+ 200 | √ |
| 20D-13 | 20 | 3 | 0.372 | 16 | 65 | 40〜+ 200 | √ |
| 30D-13 | 30 | 2.5 | 0.517 | 16 | 65 | 40〜+ 200 | √ |
| 47D-13 | 47 | 2 | 0.81 | 17 | 65 | 40〜+ 200 | √ |
| 120D-13 | 120 | 1.2 | 2.124 | 17 | 65 | 40〜+ 200 | √ |
D-15 NTC Thermistor |
Part Number MF72 NTC | R25 (Ω) | Max steady-state current(A) | Approximate resistance value at maximum current Ω) | Dissipation coefficient approx. (MW /℃) | Thermal time constant approx. (S) | Operating temperature (°C) | UL |
| 1.3D-15 | 1.3 | 8 | 0.048 | 18 | 68 | -40〜+ 200 | √ |
| 1.5D-15 | 1.5 | 8 | 0.052 | 18 | 69 | -40〜+ 200 | √ |
| 2.5D-15 | 2.5 | 7 | 0.065 | 18 | 76 | -40〜+ 200 | √ |
| 3D-15 | 3 | 7 | 0.075 | 18 | 76 | -40〜+ 200 | √ |
| 5D-15 | 5 | 6 | 0.112 | 20 | 76 | -40〜+ 200 | √ |
| 6D-15 | 6 | 5 | 0.155 | 20 | 80 | -40〜+ 200 | √ |
| 7D-15 | 7 | 5 | 0.173 | 20 | 80 | -40〜+ 200 | √ |
| 8D-15 | 8 | 5 | 0.178 | 20 | 80 | -40〜+ 200 | √ |
| 10D-15 | 10 | 5 | 0.18 | 20 | 75 | -40〜+ 200 | √ |
| 12D-15 | 12 | 4 | 0.25 | 20 | 75 | -40〜+ 200 | √ |
| 15D-15 | 15 | 4 | 0.268 | 21 | 85 | -40〜+ 200 | √ |
| 16D-15 | 16 | 1 | 0.276 | 21 | 70 | -40〜+ 200 | √ |
| 20D-15 | 20 | 4 | 0.288 | 21 | 86 | -40〜+ 200 | √ |
| 30D-15 | 30 | 3.5 | 0.438 | 21 | 75 | -40〜+ 200 | √ |
| 47D-15 | 47 | 3 | 0.68 | 21 | 86 | -40〜+ 200 | √ |
| 120D-15 | 120 | 1.8 | 1.652 | 22 | 87 | -40〜+ 200 | √ |
| 220D-15 | 220 | 1 | 2.0358 | 24 | 90 | -40〜+ 20 | |
D-20 NTC Thermistor |
Part Number MF72 NTC | R25 (Ω) | Max steady-state current(A) | Approximate resistance value at maximum current Ω) | Dissipation coefficient approx. (MW /℃) | Thermal time constant approx. (S) | Operating temperature (°C) | UL |
| 0.7D-20 | 7 | 11 | 0.018 | 27 | 89 | -40〜+ 200 | √ |
| 1D-20 | 1 | 10 | 0.023 | 27 | 89 | -40〜+ 200 | |
| 1.3D-20 | 1.3 | 9 | 0.037 | 27 | 88 | -40〜+ 200 | √ |
| 3D-20 | 3 | 8 | 0.055 | 25 | 88 | -40〜+ 200 | √ |
| 5D-20 | 5 | 7 | 0.087 | 25 | 87 | -40〜+ 200 | √ |
| 6D-20 | 6 | 6 | 0.113 | 25 | 103 | -40〜+ 200 | √ |
| 8D-20 | 8 | 6 | 0.142 | 25 | 105 | -40〜+ 200 | √ |
| 10D-20 | 10 | 6 | 0.162 | 24 | 102 | -40〜+ 200 | √ |
| 12D-20 | 12 | 5 | 0.195 | 24 | 100 | -40〜+ 200 | √ |
| 16D-20 | 16 | 5 | 0.212 | 24 | 100 | -40〜+ 200 | √ |
| 20D-20 | 20 | 4.5 | 0.345 | 23 | 115 | -40〜+ 200 | |
| 30D-20 | 30 | 4 | 0.492 | 23 | 115 | -40〜+ 200 | |
| 47D-20 | 47 | 3.5 | 0.675 | 23 | 120 | -40〜+ 200 | |
D-25 NTC Thermistor |
Part Number MF72 NTC | R25 (Ω) | Max steady-state current(A) | Approximate resistance value at maximum current Ω) | Dissipation coefficient approx. (MW /℃) | Thermal time constant approx. (S) | Operating temperature (°C) | UL |
| 0.7D-25 | 0.7 | 12 | 0.014 | 30 | 120 | -40〜+ 200 | |
| 1.5D-25 | 1.5 | 10 | 0.027 | 30 | 121 | -40〜+ 200 | |
| 3D-25 | 3 | 9 | 0.044 | 32 | 124 | -40〜+ 200 | |
| 5D-25 | 5 | 8 | 0.07 | 32 | 125 | -40〜+ 200 | |
| 8D-25 | 8 | 7 | 0.114 | 33 | 125 | -40〜+ 200 | |
| 10D-25 | 10 | 7 | 0.13 | 32 | 127 | -40〜+ 200 | |
| 12D-25 | 12 | 6 | 0.156 | 32 | 126 | -40〜+ 200 | |
| 16D-25 | 16 | 6 | 0.16 | 35 | 126 | -40〜+ 200 | |
| 20D-25 | 20 | 4.5 | 0.184 | 35 | 126 | -40〜+ 200 | |
Note: Multiple resistance values and pin types can be customized
on demand.
Application·Scope
Product Description:
Power NTC Thermistor is the perfect protector for high-power
electronic devices. It features a small size and strong power, and
can operate in a temperature range from -40°C to +125°C, with a
tolerance of ±20%. This MF72 power type negative temperature
coefficient thermistor (NTC) can also be used for storage in the
same temperature range. This high-performance NTC thermistor is an
ideal choice for protecting your electronic devices.
Features:
- Product Name: Power NTC Thermistor
- Lead Wire Material: Tinned Copper Clad Steel Wire
- Usage:: Surge Current Protection
- Storage Temperature Range: -40°C To +125°C
- Lead Wire Length: 3mm To 30mm
- Resistance Range(25℃): 0.5Ω To 400Ω
- MF72 power type NTC thermistor
- NTC thermistor protector for high power
- Overcurrent Protection NTC Thermistor
Technical Parameters:
| Property | MF72 Power Type NTC Thermistor |
|---|
| Usage | Surge Current Protection |
| Lead Wire Material | Tinned Copper Clad Steel Wire |
| Terminal Type | Radial |
| Storage Temperature Range | -40°C to +125°C |
| Tolerance | ±20% |
| Application | Electronic |
| Resistance Range (25°C) | 0.5Ω to 400Ω |
| Operating Temperature Range | -40°C to +125°C |
| Lead Wire Length | 3mm to 30mm |
| Feature | Small Size, Strong Power, Inrush Current Suppression |
Applications:
LIN KUN Power NTC Thermistor MF72
LIN KUN Power NTC Thermistor MF72 is designed to provide
overcurrent protection for high power applications, with RoHS and
UL certifications, it is highly reliable and effective. This
product is made of tinned copper clad steel wire with small size,
strong power and lead wire length from 3mm to 30mm, radial terminal
type. It has a storage temperature range of -40°C to +125°C. It is
available in 500PCS/Bag with minimum order quantity of 500PCS with
a negotiable price and delivery time of 5-7 days. It has a high
supply ability of 1000000PCS/Month with payment terms of D/P,
T/T,Paypal, Western Union. LIN KUN Power NTC Thermistor MF72 is the
perfect choice for high power applications, providing reliable and
effective overcurrent protection.
Customization:
LIN KUN MF72 Power NTC Thermistor Customization Service
Brand Name: LIN KUN
Model Number: MF72
Place of Origin: China
Certification: RoHS UL
Minimum Order Quantity: 500 PCS
Price: Negotiable
Packaging Details: 500PCS/Bag
Delivery Time: 5-7 Days
Payment Terms: D/P, T/T,Paypal, Western Union
Supply Ability: 1000000PCS/Month
Features and Specifications
Resistance Range(25℃): 0.5Ω To 400Ω
Temperature Range: -40°C To +200°C
Tolerance: ±20%
Storage Temperature Range: -40°C To +125°C
Usage: Surge Current Protection
Highlights
LIN KUN MF72 Power NTC Thermistor provides high current protection
and is used for surge current protection. It features a resistance
range of 0.5Ω to 400Ω, temperature range from -40°C to +200°C and
storage temperature range from -40°C to +125°C. It is RoHS UL
certified and has a tolerance of ±20%.
Support and Services:
Power NTC Thermistor provides technical support and services to
ensure that our customers are able to use our products to their
fullest potential. Our technical support team is available to
assist customers with any issues they may have with our products.
We also offer a wide range of services, such as installation and
repair services, to ensure that our customers are able to maintain
and operate our products safely and effectively.
In addition to technical support and services, we also offer
training programs to help our customers better understand and
utilize our products. Our training programs are designed to provide
comprehensive and in-depth knowledge about our products, as well as
how to use them in various applications. We also provide online
resources to help our customers find the answers they need quickly
and easily.
Packing and Shipping:
Power NTC Thermistor is shipped in a box with the following
dimensions: length: 23 cm, width: 30 cm, height: 10 cm. The
thermistor is placed in a foam holder and protected by anti-static
material. The box is sealed with tape and labeled with the product
name and model number. The box is then placed in a cardboard
shipping box with the dimensions: length: 35 cm, width: 45 cm,
height: 17 cm. The cardboard box is then sealed with tape and
labeled with the product name and model number.
FAQ:
- Q: What is the Brand Name of Power NTC Thermistor?
- A: The Brand Name of Power NTC Thermistor is LIN KUN.
- Q: What is the Model Number of Power NTC Thermistor?
- A: The Model Number of Power NTC Thermistor is MF72.
- Q: Where is Power NTC Thermistor produced?
- A: Power NTC Thermistor is produced in China.
- Q: What certifications does Power NTC Thermistor have?
- A: Power NTC Thermistor has RoHS UL certifications.
- Q: What is the minimum order quantity of Power NTC Thermistor?
- A: The minimum order quantity of Power NTC Thermistor is 500 PCS.
